Chevrolet Nova Forum banner

I now have C6 Vette Rotors installed..

1702 Views 4 Replies 4 Participants Last post by  L48M20
Just put some c6 12.8 x 1.26 rotors up front with some 1972 1/2 ton calipers.
The brackets where fun to mod but worked out perfect.
the Hubs are Stock rotors turned into hubs on a Lathe..

I made a 3/8 bracket that mounted to spindle and locates old bracket off that

Lots of room in my rim but these rims are made for newer Suburban and Tahoes

What do you think.

If you care and want something clarified for you just ask.
See less See more
1 - 1 of 5 Posts
do you feal an improvement on stoppping yet
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.