Chevrolet Nova Forum banner

Disk brake conversion suggestions!

2695 Views 4 Replies 4 Participants Last post by  RED67
I would like to convert to disk brakes on my 63 nova. Can anyone suggest anything? This is for a daily driver. Any donor vehicles that I can use? Thanks in advance!!!
1 - 5 of 5 Posts
BigDre72,
I've sent you an email to the address specified on your profile.
here s what I'm using, 5 ug spindles modded, 5lug lower controll arms, stock single piston calipers, stock single piston calipers, and 67 two peice rotors. The two and one peice rotors are the same "sizes", just one is two and one is one. I have only mocked up this setup on the 62. Everything clears and workes just fine.
Here are some links
http://www.allchevynova.com/nova/discbrake.html
http://www.oldengine.org/unfaq/leadfoot/discs.htm
http://www.oldengine.org/unfaq/leadfoot/spindle/drum2disc.htm
Hope this helps.
I will be finishing up my swap in the next week or two. Hope this helps
Get the CPP kit.
Simple.

Red67:D
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top