Chevrolet Nova Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I am upgrading my 1965 Nova SS, 5-lug front drums to a Wilwood kit. In doing so, I decided to swap the spindles for a disc brake set rather than machine the 5/8-18 thread in the existing spindles. As a sanity check, can I remove the spindle without having to compress/remove the spring? I am guessing keeping the shock in place that the spring will stay in place for the most part, but it has been a number of years since I worked on this end of the car and wanted to get a confirmation. Thanks for any help you can provide.
 
1 - 1 of 1 Posts
Top