63 hardtop door alignment
my doors were sagging, removed fenders, loosened the #4 Philips on the cowl side of hinge, removed the latch to bring the door towards back and up.
Seems to be back as far as adjustment will allow (could be a tad more)
however when lifted at latch end to line up at the top of 1/4 panel its like the wing vent is stopping it. The top of the wing vent frame (new rubber by the way) seems to be very tight against the pillar. I assume there is no adjusting the vent frame and that would now create a window track problem.
Anyone go through this themselves?