Hi, i am a new member and I need some pics of the bottom on the trunk pan, where the bumper bolts onto. All of the sheetmetal was gone when I got the car and have no idea if there was a support strip connecting the trunk pan to the vertical sheetmetal, the one that has the bumper hole in. The car is a 1972 Nova, two door, was 307 auto, going to be a 427 4 speed, someday! I have named her Frankenova, as she looks like she has been through a very rough life. Thanks, Greg Ferguson:clonk:

Consider this a goldden oportunity to back half the car with a Detriot Speed kit or one from many of the other fine vendors such as:
http://www.appliedracing.com/pages/products/Frames_components/subframes_suspensions/018527-018528.html
http://www.cachassisworks.com/cac_featured.html
http://www.competitionengineering.com/catalog/CategoryDisplay.asp?CatCode=23002
http://www.fatmanfab.com/07page23.htm
http://www.martzchassis.net/page7.htm


If you want to modify it yourself to make what you have still work, then look at this article:

http://www.superchevy.com/technical/chassis/suspension_steering/0507sc_fat/